Hager Full Mortise 3-Knuckle Concealed Anti-Friction Bearing SS Anchor Hinge Satin Stainless Steel LH 5 x 4.5 - AB8508-5X4.5-US32D-LH
ANSI A2511 (Brass) ANSI A5511 (Stainless Steel)
Handed hinge. Must specify handing when ordering.
For use on heavy weight doors receiving high frequency use.
For square edge doors
Full Mortise Hinges have one leaf mortised in the door edge and the other leaf mortised in the jamb. This is the most common hinge application.
For anchor hinges, the hinge leaves are mortised in the door and jamb at the top corner, ANCHORING the door in the jamb. Provides increased reinforcement and support at the top corner where stress can occur due to high frequency service and abuse. Only available in Full Mortise type.
Three Knuckle
Two anchor leaves
Non-removable pin (NRP) as standard with flush pin and plug.
Template Hole Pattern
Material: Brass w/ Stainless Steel pin, Stainless Steel w/ Stainless Steel pin
Fasteners: 1/2 x 12-24 machine screws, 1-1/4 x 12 wood screws
Specify finish when ordering.
Standard packaging includes one (1) hinge with screws.
Complies with ANSI/BHMA standards for ANSI A156.1
Note: Must be used with one pair of heavy weight full mortise hinges (AB750 or AB850 - sold separately)
For special requests (i.e. Raised Barrel, Hospital Tips, special Screws, etc.) please call for pricing and availability.
The following part numbers are available by selecting the options above.
AB8508-5X4.5-US10-LHAB8508-5X4.5-US10-RHAB8508-5X4.5-US10B-LHAB8508-5X4.5-US10B-RHAB8508-5X4.5-US26D-LHAB8508-5X4.5-US26D-RHAB8508-5X4.5-US32D-LHAB8508-5X4.5-US32D-RH
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.